Skip to main content
J. J. Keller Support Center

Renaming an ELD

If an ELD was moved to a new vehicle or was incorrectly named during initial configuration, the ELD name can be changed at any time. If the ELD has been moved between vehicles, please see the full guide about moving ELDs in this article.

To rename the ELD start by being connected to the ELD.

clipboard_e9285bfc7708d576f3ea3642424f76265.png

 

Go to the menu in the top right and select System Menu.

ANDROID™    IPHONE®/IPAD®
androidhome.pngaclicksystemmenu.png

clipboard_ee5980b23ed21aad85bf62453b1430234.png

clipboard_e2a045f5ebddbc85df7d282b4c4d4395b.png

 

Open Diagnostics.

ANDROID™    IPHONE®/IPAD®
clipboard_e8c0ceaf6a8a9a09fc6ec3b64c462cd8f.png 2.jpg

 

Select Set ELD Config.

ANDROID™    IPHONE®/IPAD®

clipboard_eae9953aa6414fb7a63be549b0076e0b2.png

clipboard_e8964c33525bdb21682c5405aaecf67f7.png

 

Tap in the Vehicle/Unit Number field, clear out any existing value and type in the correct Unit/Vehicle Number. This Unit/Vehicle Number needs to match the corresponding Vehicle/Unit in the Encompass back office.

If the ELD has moved vehicles, it is suggested to set the Engine Data Bus to Auto-Detect Databus.  If it has not moved, leave this field as is.

Tap OK (Android)/Save (iOS).

ANDROID™    IPHONE®/IPAD®

eldconfigand.jpg

ioseldconfig.jpg

 

On Android™, answer Yes/Continue/Pair/OK to any Bluetooth pairing requests. On iPhone®/iPad®, the user will be prompted to turn Bluetooth off and back on again. Leave the prompt on the screen and complete this in the device's Bluetooth settings by pressing the Home button on the front of the device to leave the app. Then return to the app and answer the prompt as shown below.

ANDROID™    IPHONE®/IPAD®

clipboard_e78ed2d36af8c370db95abe117935c2b3.png

clipboard_ed74f73f4394ada1a8224198bd49e45a4.png

                    

The new vehicle number should then be displayed on the Encompass® ELD dashboard. 

 

ODOMETER CALIBRATION

Once the vehicle number has been changed on the ELD, the changes need to be sent to the Encompass® back office. To do this, an odometer calibration needs to be completed in the Encompass® ELD application.  Follow this guide for steps to complete the odometer calibration.

  • Was this article helpful?