Skip to main content
J. J. Keller Support Center

Odometer Calibration

The engine odometer and dashboard can drift apart a bit so drivers will be prompted within Encompass® ELD to calibrate the odometer at initial configuration and once every 30 days after that.

 

While connected to the ELD, select the Menu in the upper right-hand corner.

ANDROID IPHONE/IPAD
androidhome.png clipboard_e6be3b721546b7f486a5954b312938b4c.png

 

Select System Menu.

ANDROID IPHONE/IPAD
aclicksystemmenu.png clipboard_e515742e249ef23e0cd86ed1cefbb4f74.png

 

Select Diagnostics.

ANDROID IPHONE/IPAD
clipboard_e54530a93027d36c1027ebdd56e653892.png 2.jpg

 

Select Odometer Calibration. Depending on screen orientation, you may have to scroll down to see this option.

ANDROID IPHONE/IPAD

(Odometer Calibration will not display on Android device if you are not connected to the ELD)

clipboard_e2bc072e7b128d016b8a96d3addb3dfb9.png

1.jpg

 

Enter the odometer reading on the dash and press OK.  Note: The engine must be running to perform the odometer calibration.

ANDROID IPHONE/IPAD
clipboard_eb7aa53a4590372131c071737f804fad4.png 3.jpg

 

  • Was this article helpful?