Trimble CoPilot Truck Application - Trip Planning
Entering a New Destination
Select Menu in the upper right hand corner from the Encompass® ELD dashboard. Select Trimble CoPilot.
Tap on the magnifying glass.
Drivers can choose multiple ways to enter the new destination. The most commonly used method is by Address.
Enter a City or Zip Code, then Enter a Street Address. Then, select the correct address from the list below the zip code/address fields. Once the address is selected the route will be displayed.
Select the green arrow to start navigation. The route is displayed on the street-level map and the turn-by-turn directions will begin.
![clipboard_e4ff94ed1612fa8be22c9eddfc0c7690f.png](https://support.jjkeller.com/@api/deki/files/23173/clipboard_e4ff94ed1612fa8be22c9eddfc0c7690f.png?revision=1&size=bestfit&width=367&height=564)
When the vehicle is in motion, the left-hand side of the screen will display the driver's real-time hours of service information. The right-hand side of the tablet displays the route, allowing the driver to know where they are going and if they have enough available time to make it to their destination.
![Driving.png](https://support.jjkeller.com/@api/deki/files/23174/Driving.png?revision=1&size=bestfit&width=403&height=613)
To make modifications to the route, add in additional stops, etc., drivers can click on the CoPilot Driving Menu—the button in the top left with the three bars.
![clipboard_e3955b7664f6fe38ce1fad74134f34ce5.png](https://support.jjkeller.com/@api/deki/files/23175/clipboard_e3955b7664f6fe38ce1fad74134f34ce5.png?revision=1&size=bestfit&width=412&height=615)