Skip to main content
J. J. Keller Support Center

Trimble CoPilot Truck Application - Trip Planning

Entering a New Destination

Select Menu in the upper rigth hand corner from the Encompass® ELD dashboard. Select Trimble CoPilot

Trimble menu.png

 

Tap on the magnifying glass.

clipboard_e995b7d1f2afae7f8d016f198930206e2.png

 

Drivers can chose multiple ways to enter the new destination. The most commonly used method is by Address.

clipboard_e3e47081e491b02abcab22840860a1ea8.png

 

Enter Zip Code then tap on Enter Street Address.
 

clipboard_ec3b13bb612a13194e44749321368aa13.png

 

Select the address from the list below the text box. Once the address is selected the route will be displayed.

clipboard_e8d81c8c9d4e5c437abb643d94f4c13fa.png
 
Select the green arrow to start navigation. The route is displayed on the street level map and the turn-by-turn directions will begin.
clipboard_e51911e82206852a0ca2796a8c335931c.png
 
When the vehicle is in motion, the left hand side of the screen will display the driver's real-time hours of service information. The right hand side of the tablet displays the route, allowing the driver to know where they are going and if they have enough available time to make it to their destination.
clipboard_eabb075cef05dbf4a0946207a39c4c527.png
 
To make modifications to the route, add in additional stops, etc., drivers can click on the CoPilot Driving Menu- the button in the top left with the three bards.  Please see the Trimble CoPilot Reference Guide below for additional instructions.
 
clipboard_eec3878e0006d2c12706004d94a3b349a.png