Skip to main content
J. J. Keller Support Center

Encompass DVIR Setup-DVIR Settings


Go to Settings from the dropdown next to your name, in the upper right corner.

clipboard_e0633025aecd6f60186dc93aa189633e2.png

When in Settings, click on the Vehicles tab.

clipboard_e170af97a6c6f9ce88e526ceab54dbc33.png

 

Find the Unit Maintenance box and select DVIR Settings.

clipboard_e69ba545ea16cd6b87936a13516da3139.png

 

These settings are split up between the Encompass® ELD application and the stand-alone DVIR applications (as shown with orange in image below).  To change any of these settings, toggle them on or off.

  • Allow Driver to Complete Electronic DVIRs - enables/disables electronic DVIRs within the respective applications.
  • Generate Alert if PreTrip DVIRs Have Defects - enables/disables homepage alerts in Encompass for pre-trip inspections reporting defects.
  • Default View - [DVIR Application Only] determines what screen is shown upon logging in, either the vehicle inspections or timesheet. 
  • Out of Service / Defect E-Mail Alerts -  enables/disables your company to receive a real-time email when a DVIR is submitted with an out of service defect or regular defect.

Once all necessary settings are established, click Save.

 

clipboard_e5a4f9485eb7caeea08e0e1d3537fd747.png

 

  • Was this article helpful?