Skip to main content
J. J. Keller Support Center

Adding/Editing Log Events in Encompass® ELD for Android™

 

 

 

The ELD Mandate allows drivers the ability to edit today's log, previous days' logs, as well as adding log events. When editing a log, there are two things the driver needs to keep in mind:

  1. If there isn't already a log created for that day, an off duty log will have to be created first before being able to edit the log.
  2. Any automatically recorded driving events are unable to be edited.

 

Tap on the View Log icon from the Encompass® ELD Dashboard.

clipboard_ea80d2f146bb179221d99d0e96e5f8119.png

At the left side of the screen, tap Edit Log.

clipboard_eddafe0e03a92e08e4ba83ae0f380d56a.png

The driver will then see the edit log screen which will show them their log for that day. 

Edit Log.png

 

Adding an ELD Event

Tap on Add Event to get to the Add ELD Event screen.

  1. Status - (required) Select the appropriate duty status.
  2. Start Time - (required) Enter the start time of the duty status.
  3. End Time - (required) Enter the end time of the duty status.
  4. Location - (required) Enter the location in which the duty status started.
  5. Ruleset - If the rule set needs to be changed, tap on the rule set and select the appropriate one.
  6. Unit Number - Enter the unit number involved, if applicable.
  7. Trailer Number - Enter the trailer number involved, if applicable.
  8. Shipment Info - Enter what is being hauled, if applicable.
  9. Annotation - (required) Enter the reason why the event is being added.

Once all of the necessary information is added, click Save. The driver will be brought back to the previous screen and the message “You have successfully changed your log” will appear at the bottom for a few seconds. Continue adding events as needed.

odnd additions add event.png             

 

The event is then shown on the log for that day.

clipboard_eb8c94f48f1128c8da647cc058dd52ac4.png

 

The new status will be displayed on the grid log screen in green, denoting that it was an edit made to the log.

 

Editing ELD Events

In the following example, the status at 1:00PM needs to be changed to an earlier time. From the Edit Log page, tap Edit next to the duty status that needs to be changed.

clipboard_eb5c093add089aa5e70743231b14edf87.png

 

Tap on the start time and select the new start time. In this case, 12:00:00 PM is now selected. Ensure that all required fields have information added (denoted by *). Enter an Annotation as to why the change was made. Click Save when finished. The driver will be brought back to the previous screen and the message “You have successfully changed your log.” will appear at the bottom for a few seconds.

clipboard_eb911768a72603a90073509864687a81b.png

 

 

The final status is now changed from 01:00:00 PM to 12:00:00 PM.

clipboard_ea3159c7a8a3a582fe0bce9a84a4a886b.png

 

Additionally, the edited status will be displayed on the grid log screen in green, denoting that it was an edit made to the log.

 

 

  • Was this article helpful?