Skip to main content
J. J. Keller Support Center

Moving Drive Time from One Team Driver to Another

There may be scenarios where drive time is on the incorrect driver in a team as the designated driver was not switched to the correct one.  The steps below advise how the drivers may correct this via the Encompass® ELD application.


Select View Log.



Select Edit Log. Next to the drive time that needs to be reassigned, select Edit.



Select Reassign.



Select the driver that should have the driving event.  Select the duty status that should replace the drive time on this log. An annotation is required when making any kind of log edit; indicate why the drive time is being reassigned and select Apply.



The driver will then be prompted with a warning that the log edit is now pending for themselves and the other driver.  The drive time will remain on this log until the other driver accepts it. Select OK.



Once complete, the driver that is to accept the drive time to their log can either logout and log back in, or, go to View Log > Review Edit Requests. Select Check for Edit Requests to download any pending log edits. Select Review Log to review the edits.



Review the changes to the log and select Accept Edit to add the drive time to the log.



Select Accept when prompted.



The drive time will then display on the appropriate drivers log.  Once the edit is accepted by the driver and the log is submitted to Encompass, the originating driver should have the drive time removed from their log.

  • Was this article helpful?