Skip to main content
J. J. Keller Support Center

Roadside Inspection Manual Entry

Adding a Roadside INspection

In the event that a driver goes through a roadside inspection, the inspection can be entered into Encompass to track for the driver.  To add an inspection, go to:

Drivers > Roster. Locate and click on the driver in the list to open up their file. Then, select the Inspections tab.

clipboard_e0886e578cb2600b3356c6c57bb96a083.pngclipboard_ec1acdcadd76661882962995334fb7bba.png
 

Any previously entered inspections will be listed here. To add an inspection, click Add New.

clipboard_e492a41c56ad4b1d44b8a3bc6baaf7dab.png

Enter the necessary information from the Inspection, noting the Required fields.  These items should be found on a copy of the inspection from the officer.

clipboard_e4735df33451d5649af78b6042d3b27f5.png

 

Once all necessary information is entered, click one of the options at the top/bottom of the form:

  • Save to store the information
  • Save & Add New to store the information and display a blank form to enter another inspection
  • Save & Add Attachment to store the information and add an attachment from your device. The user will be taken to the screen to add an attachment.
  • Save & Add Violation to store the information and add a violation. The user will be taken to another screen to add the violation information, as outlined below.

clipboard_eeca0de6c80ac4121a6b649f874091f1a.png

 

Adding a Violation to a Roadside Inspection

If Save & Add Violation is selected, the user will be taken to the screen to enter information about the violation.  These details will be found on a copy of the inspection if a violation was given. Once all necessary information is entered, click Save or Save & Add New to add another violation for this inspection. 

Note: Once a violation is selected, the BASIC information will automatically populate based on information obtained by the CSA.

clipboard_eebf56cbe20fd822b3f638630cafec5ca.png

Violations will then be shown in the Violations column and section on the main Inspections page for the driver.

clipboard_eaf1c5c414a1da58a5037e47d58a0e9a7.png

Edit an Inspection

To edit a manually entered inspection, either hover over the inspection line and click the pencil to Edit (in red below) or click on the Inspection date to open it's details and click Edit (in blue below). Update any necessary information and Save.

clipboard_edf5601a750ecf57b0d442bd81c0b3cd9.png

clipboard_e747e5dd6eab6dd87f34c783acfd940f0.png

If a Violation needs to be added to a previously-added Inspection, click into the inspection as shown in blue above. Find the Violations section and click Add New.

clipboard_e27fbd0dff9c2e5ecaa509bb3e2e731d5.png

 

Add an Inspection Attachment

To add an attachment to an inspection, hover over the inspection line and click on the paper clip icon.

clipboard_ee53b0b255a6d3c354d4e462481b580ab.png

Fill in necessary information and add your file to the box. Click Save or Save & Add New to add another attachment.

clipboard_e05b7e53b5bbf726f65cc8df6ff61a08f.png

Delete an Inspection

Hover and click on the trash can icon to Delete the inspection. A pop-up message will ask you to confirm the deletion.

clipboard_e2de07a9c996c518efb002e1ad4f8cbb4.png

clipboard_e4dd49db4412d0dc47876ce7ca08e437e.png

  • Was this article helpful?