Skip to main content
J. J. Keller Support Center

Add Mileage Listings


Mileage listings may be required to be sent with tax reports in some jurisdictions. To add the mileage listing to a fuel tax trip, first locate the unit by going to Vehicles > Fuel Tax. Click on the unit to open it's Trips. 

clipboard_e8a27ecc50ff7b8e68ab669bdef59d3ff.pngclipboard_edd5609a32c453fde2abed1a124590801.png

 

Next, you can either click the Edit pencil when hovering over the Trip, or click into the Trip # and click Edit next to Trip Information.

clipboard_e4b1097464fd126ce5bfdcedfa3d3bed3.png

clipboard_e15c322c916168c54f1f8b5239bbb0ab7.png

From the Edit pop-out screen, click Edit Listings near the bottom, next to Save.

clipboard_e073772d5e35f5fd5bb668ef1044cda29.png

There will be a line for each trip line from the trip entry screen. Enter in the following information:

  • Date - The trip line date may already be displayed. If this date is not correct, enter the correct date or use the calendar next to the field
  • Entry City - Enter the city closest to the entry point of the trip line jurisdiction
  • Exit City - Enter the city closest to the exit point of the trip line jurisdiction
  • Highways - Enter the major highways operated on in the jurisdiction
  • Axles - Enter the total number of axles in the combination for this trip line
  • Gross Weight - Enter the combined gross weight for the unit on this trip line (maximum weight of vehicle with truck and trailer fully loaded)

clipboard_e084477af50db390cae6c0a9cfd644654.png

Once the details are entered, click Save.

  • Was this article helpful?